OTHER PRODUCTS

SERIES 11 TABLE SAW GUARD: Versatile, simple to install, easy to use. Helps prevent circular saw accidents. Allows visibility during normal and complex cutting operations.

SERIES 14 SAFETY SHIELD: Chip and Chuck Shields for Lathes, Mills and other machines to protect eyes from chips, coolant, and broken tool bits. Splash Shields with magnetic base, protects against chips and liquids. Available in different sizes with flat or concave shields, Lexan¨ or acrylic.

SERIES 16 HAND TOOLS: Magnetic and Vacuum Lifters available in single or double sizes. Lightweight Aluminum Tongs available with various length handles and jaws.

SERIES 20 FIXED BARRIER GUARDS: Ruggedly constructed using .75" steel bar stock for the main frame and hexagonal steel adjustable pins. Clear panels of shatterproof Lexan® available.

SERIES 24 SPARROW INFRARED LIGHT BARRIER: For applications best suited for economical, general purpose uses on a wide variety of machines and point of operation personnel hazards.

SERIES 24/25-74 WORK STATION: A combination Operator Hand Station and Safety Device. Versatile for use on automatic ar manually activated machines The ÒFeather TouchÓ hand pads are designed to eliminate carpel tunnel injuries. The Work Station can be easily rotated and fixed up to 90 degrees forward from horizontal at any time for optimal productivity. Available with Series 24 or 25 Light curtains depending on the environment.

SERIES 25 EAGLE EYE INFRARED LIGHT BARRIER: OSHA & ANSI COMPLIANT PRESENCE SENSING DEVICES. Not affected by persons or objects outside of the guarding zone. Requires no calibration; tough construction for the production environment. For hydraulic or air clutch activated shears.

SERIES 26 HAWK EYE INVISIBLE INFRARED PERIMETER GUARD: Designed especially for perimeter guarding with a lower light beam density. For detecting bodies going into hazardous area and locking out the control. Mirrors are used to bend guarding area around the hazard.

SERIES 74 FEATHER TOUCH HAND STATION: Designed for areas where repetitive activation of two hand buttons may contribute to fatigue, carpel tunnel or repetitive stress injuries.

SERIES 75 TWO HAND CONTROLS: Designed to interface with the 100-400 Series of press and machinery control panels. The Series 75 complement requirements for self-checking circuitry and control reliability.

SERIES 78 SAFETY MATS: The Safety Mat can be placed so that if a person stands on the mat, the machine will not commence a cycle. If the machine has started a cycle and a person steps onto the mat, the machine will stop instantly! The Safety Mat is heavy duty, soft molded vinyl construction and is extremely resistant to wear, oils, grease, and most chemicals. Available in variety of sizes. Safety Mats may not qualify as machine guards by themselves, but are easily integrated into other systems.

SERIES 100 TRIPMASTER CONTROLS: A two hand control system for machine actuation, riveters, staking presses, and bench air/hydraulic presses,. combines two-hand control and main control panel with solid-state circuitry to provide anti tie-down/repeat protection. Easily installed; operates on 1 or 3 phase power. Measures just 5Ó x 7Ó x 13Ó.